How to Apply DTF

Set your heat press to 300F

Use heavy pressure 

HOT PEEL (reg film)

Press the DTF for 7-10 Seconds at 300F.

Peel the transfer.  Do not force the transfer off.  

A post-press helps to seal the transfer to the garment. Now it's time to decide what kind of finish you'd like!

For a gloss finish: use teflon paper.
For a matte finish, use parchment paper.

Cover your transfer with the option of your choice, then post-press your transfer for 5-10 seconds.

Pro tip: You can even use scrap fabric to post press! We find this works great in a pinch.

COLD PEEL (Glitter, Glow in the dark, SIlver and GOLD)

Press the DTF for 7-10 Seconds at 300F.

Peel the transfer after you have left it to be cold.   Do not force the transfer off.  

A post-press helps to seal the transfer to the garment. Use parchment paper.

Cover your transfer with the option of your choice, then post-press your transfer for 5-10 seconds.

 

UV DTF

1. Peel design transfer off of backing.

2. Place the transfer on the cup ensuring design is straight and positioned correctly.

(The adhesive is very strong. Once the transfer touches the glass its impossible to take off)

3. Press the transfer down, working from the centre outwards, pushing out any bubbles.

4. Rub all over the design with your fingers. The more rubbing the better.

5. Peel clear film off and you're done!

Hand wash only.

 

We are not responsible for application mishaps.